Cap Tightening Machinery and Cap Retorquing Equipment
Inline Cap tightening machines are commonly used for
multiple purposes. For instance many specialty caps such
as pump sprayers or trigger sprayers do not lend themselves
easily to automatic sorting systems and are thus placed by
hand onto the bottles. But production speeds are such that
hand tightening is not an option. A cap tightener fits
nicely into this situation, with options such as trigger
sprayer alignment also available.
Another use is for smaller operations that just don't quite
have the resources to fully automate their capping system, but
need to speed up beyond hand-held cap tighteners.
In this case the operators simply start the caps as they run
down the conveyor and the cap tightener does the rest.
A third use is for retorquing operations. Inductions
sealers are commonly used in today's packaging environment for
the dual purpose of tamper evident packaging and prevention of
spillage during shipment or in the retail setting (liability).
So while the cap may have originally been applied and
tightened automatically, induction sealing tends to loosen the
cap. So in this case, a tightener backs up as a cap retorquer.
Also available are hand-held cap tighteners and table top
cap tightening machines. (Scroll to bottom of page).
CS - 5200 Inline Cap Tightening Machine
CS-5200 Inline Cap Tightener and Retorquer
Tightener
Features:
• Fully adjustable for caps from 8 mm to 110 mm.
• Fully adjustable from 1 inch to 14 inch high containers.
• Heavy duty 304 Stainless steel welded C frame.
• Stainless steel top and bottom belt plates.
• All shafts from ¼ to 2.5 inches manufactured in 304
stainless steel.
• 6 capping discs, with bottom screws change over.
• Direct gear motor transmission through coupling for capping
belts movement.
• Chain power transmission for capping discs.
• DC gear motor for independent speed control of gripper
belts.
• DC motor for independent speed of capping discs.
• Capping discs adjustment by stainless steel frontal knobs,
with lock nut hand wheel.
• Capper height adjustment by central 7000 mechanical jack.
• Gripper belt adjustment by hand wheel.
• No change parts needed for a wide range of containers
Electric and pneumatic requirements:
• 110 Volts, 60Hz, 15 Amps.
• 5 CFM @ 80 p.s.i.
Options:
Torque adjustment:
• 4 Mechanical clutches for individual torque adjustment.
Double belt assembly:
• 2 Additional gripper belt for bottle holding (Samples or
spacing needed for production)
CS-5200 Cap Tightening Machine and Retorquer
CS-5200.pdf
CS-5200 dimensions.jpg
|